Aerogen USB controller

Aerogen USB controller

A portable power source, which can be operated from the USB connection and USB ports on ventilators and other medical equipment (not available in the US).

Categories: , , ,
  • Description

Description

A portable power source, which can be operated from the USB connection and USB ports on ventilators and other medical equipment (not available in the US). This controller has a choice of 30-minute and 6-hour operation modes. Powering Aerogen technology at every stage of patient care including mechanical ventilation, HFNC, NIV, and spontaneous breathing.
Reusable
Simple to set up the Aerogen USB Controller can be used multiple times, on different patients, throughout the hospital.
Flexible
Two operation modes of use – 30-minute and 6-hour mode depending on the medication delivery needs.
Portable
Can be operated from USB ports on ventilators or any other medical equipment (not available in the US), plus plug socket with Aerogen AC/DC adaptor option.

  • The Aerogen® USB Controller System includes the Aerogen® Pro and Aerogen® Solo Nebulizers.
  • intended to aerosolize physicianprescribed medications for inhalation to patients on and off ventilation or other positive pressure breathing assistance in the hospital environment, and on vent only in the homecare environment.
  • Aerogen USB controller characteristics:
  • Function: Operate the Aeorgen Pro and Aerogen Solo nebulizers.
  • Can be operated from any USB port (from adapters, power banks, monitors, ventilators…)
  • The controller also includes indicators for nebulization cycle selection (30 minutes or 6 hours).
  • Thông số kỹ thuật:
  • Dimensions: 2865mm L X 28mm W X 25.2mm H
  • Weight: 91 g
  • Power source: Input 100 to 240VAC, 50 – 60 Hz/200-100mA, Output 5VDC, 1.5A
  • Operating environment: temperatures from 5ºC – 40°C and humidity from 15% to 95%
  • Aerogen Pro nebulizer characteristics:
  • The Aerogen® Pro Nebulizer is intended for multiple patient use.
  • Using the Vibronic® technology for nebulization.
  • Small in size, with capacity of 10mL.
  • Small partical size for better disposition of medication at lungs.
  • Noise level is low, comparing to Compressor and Ultrasonic nebulizers.
  • The temperature of the medication will not rise more than 10°C (18°F) above ambient during normal use.
  • Higher flow rate and smaller residual volume, comparing to Compressor nebulizers.
  • Specifications:
  • Dimensions: 45 x 50 x 50 mm
  • Nebulizer Weight: 25 g
  • Nebulizer Capacity: 10 mL
  • Performance Specifications:
  • Particle Size: Average tested 3,1 µm
  • Flow Rate: > 0,2 mL/phút
  • Residual Volume: <0.1 mL for 3 mL dose
  • Operating noise level: < 35 dB, measured at 0.3 m distance
  • Aerogen Solo chracteristics:
  • The Aerogen® Pro Nebulizer is intended for single patient use.
  • Using the Vibronic® technology for nebulization.
  • Small in size, with capacity of 6mL.
  • Small partical size for better disposition of medication at lungs.
  • Noise level is low, comparing to Compressor and Ultrasonic nebulizers.
  • The temperature of the medication will not rise more than 10°C (18°F) above ambient during normal use.
  • Higher flow rate and smaller residual volume, comparing to Compressor nebulizers.
  • Specifications:
  • Kích thước (Cao x Rộng x Sâu): 67 x 48 x 25 mm
  • Cân nặng đầu phun: 13,5 g
  • Thể tích chứa thuốc: 6 mL
  • Performance Specifications:
  • Particle Size: Average tested 3,1 µm
  • Flow Rate: > 0,2 mL/phút
  • Residual Volume: <0.1 mL for 3 mL dose
  • Operating noise level: < 35 dB, measured at 0.3 m distance