Aerogen Solo

Aerogen Solo

More Effective, More Control
The Aerogen Solo delivers more inhaled medication to the lungs,4 in less time,5 with less residual volume,7 compared to jet nebulizers, giving confidence in a more effective and controlled treatment.

Categories: , , ,
  • Description
  • Reviews (0)

Description

More Effective, More Control
The Aerogen Solo delivers more inhaled medication to the lungs,4 in less time,5 with less residual volume,7 compared to jet nebulizers, giving confidence in a more effective and controlled treatment.
Lowering Risk of Exposure
The medication reservoir is isolated from the breathing circuit which minimizes nebulization of contaminated fluids.1 The risk of exposure to bioaerosols is reduced because the need to open the circuit is eliminated.
Lung Recruitment Maintained
The Aerogen Solo is uniquely designed remaining in place during ventilation. This closed system requires minimal management and can be left inline reducing staff handling and workload.
Multiple Therapies
The Aerogen Solo delivers more effective medication throughout the hospital through mechanical ventilation and non-invasive support such as non-invasive ventilation (NIV), high flow therapies (HFNC) and spontaneously breathing patients.
Simple & Quiet
Easy to set up and virtually silent operation, with no added flow required.

  • T he Aerogen® Solo System consists of the Aerogen® Solo nebulizer and the Aerogen® Pro-X Controller.
  • The Aerogen Solo Nebulizer System is a portable medical device for single patient use that is intended to aerosolize physician-prescribed solutions for inhalation to patients on and off ventilation or other positive pressure breathing assistance.
  • Aerogen Pro-X controller characteristics:
  • Function: Operate the Aeorgen Solo nebulizer.
  • The controller also includes indicators for nebulization cycle selection (30 minutes or continuous), battery charge status and fault conditions.
  • The controller can operate from the AC/DC Adapter or the internal rechargeable battery (up to 45 minutes).
  • Specifications:
  • Dimensions: 33mm H x 75mm W x 131mm D
  • Controller Cable Length: 1.8 m
  • Weight including battery and cable: 230 g
  • Power Source: input 100 to 240 VAC 50 – 60 Hz, output 9 V
  • Operating environment: temperatures from 5ºC – 40°C and humidity from 15% to 95%
  • Aerogen Solo chracteristics:
  • The Aerogen® Pro Nebulizer is intended for single patient use.
  • Using the Vibronic® technology for nebulization.
  • Small in size, with capacity of 6mL.
  • Small partical size for better disposition of medication at lungs.
  • Noise level is low, comparing to Compressor and Ultrasonic nebulizers.
  • The temperature of the medication will not rise more than 10°C (18°F) above ambient during normal use.
  • Higher flow rate and smaller residual volume, comparing to Compressor nebulizers.
  • Specifications:
  • Dimensions: 67 mm H x 48 mm W x 25 mm D
  • Nebulizer weight: 13,5 g nebulizer and plug
  • Nebulizer capacity: Maximum 6 mL
  • Performance Specifications:
  • Particle Size: Average tested 3,1 µm
  • Flow Rate: > 0,2 mL/phút
  • Residual Volume: <0.1 mL for 3 mL dose
  • Operating noise level: < 35 dB, measured at 0.3 m distance
  • Aerogen Ultra chracteristics:
  • The Aerogen Ultra is an accessory specific to the Aerogen Solo nebulizer.
  • It facilitates intermittent and continuous nebulization and optional supply of supplemental oxygen to pediatric (29 days or older) and adult patients.
  • In intermittent use for a maximum of 20 treatments; (typical usage profile of four 3 mL doses per day over 5 days) or in continuous use for a maximum of 3 hours.
  • Optimal aerosol delivery is achieved with valved mouthpiece or valvedface mask with low/no oxygen flow.
  • Can be used via mouthpiece or aerosol face mask.
  • Continuous Nebulization Tube Set characteristics:
  • The Aerogen Continuous Nebulization Tube Set is an accessory specific to the Aerogen Solo nebulizer which enables safe continuous infusion of liquid medication for aerosolization
  • Non-standard luer connectors eliminate the risk of misconnection.
  • Drop-by-drop continuous nebulisation.
  • The tubing priming volume is maximum 3.65mL.
  • Aerogen’s recommended input rate of medication into the Aerogen Solo nebulizer during continuous nebulization is up to a maximum of 12 mL per
  • For continuous use, the life of the Aerogen Solo nebuliser and the ContinuousNebulisation Tube Set have been qualified for use for a maximum of 7 days.

Reviews

There are no reviews yet.


Be the first to review “Aerogen Solo”