Aerogen Pro-X

Untitled-3-1-2
Untitled-3-1-2

Aerogen Pro-X

Aerogen USB controller
simplified Cerebral Function Monitoring (CFM)

Powering Aerogen technology at every stage of patient care including mechanical ventilation, HFNC, NIV, and spontaneous breathing. The Aerogen Pro-X Controller portable power source with 30-minute and continuous modes is specifically designed to provide high-performance aerosol medication treatments throughout the hospital.

Categories: , , ,
  • Description

Description

Order

General Information

Powering Aerogen technology at every stage of patient care including mechanical ventilation, HFNC, NIV, and spontaneous breathing. The Aerogen Pro-X Controller portable power source with 30-minute and continuous modes is specifically designed to provide high-performance aerosol medication treatments throughout the hospital.
Reusable
Simple to set up the Aerogen Pro-X Controller can be used multiple times, on different patients, throughout the hospital.
Flexible
Two modes of use – 30-minute and continuous depending on the medication delivery needs.
Portable
An internal 45-minute battery enables you to take the Pro-X Controller wherever it’s needed. With optional wall mount adapter for longer use in a single location.

Specifications

  • T he Aerogen® Solo System consists of the Aerogen® Solo nebulizer and the Aerogen® Pro-X Controller.
  • The Aerogen Solo Nebulizer System is a portable medical device for single patient use that is intended to aerosolize physician-prescribed solutions for inhalation to patients on and off ventilation or other positive pressure breathing assistance.
  • Aerogen Pro-X controller characteristics:
  • Function: Operate the Aeorgen Solo nebulizer.
  • The controller also includes indicators for nebulization cycle selection (30 minutes or continuous), battery charge status and fault conditions.
  • The controller can operate from the AC/DC Adapter or the internal rechargeable battery (up to 45 minutes).
  • Specifications:
  • Dimensions: 33mm H x 75mm W x 131mm D
  • Controller Cable Length: 1.8 m
  • Weight including battery and cable: 230 g
  • Power Source: input 100 to 240 VAC 50 – 60 Hz, output 9 V
  • Operating environment: temperatures from 5ºC – 40°C and humidity from 15% to 95%
  • Aerogen Solo chracteristics:
  • The Aerogen® Pro Nebulizer is intended for single patient use.
  • Using the Vibronic® technology for nebulization.
  • Small in size, with capacity of 6mL.
  • Small partical size for better disposition of medication at lungs.
  • Noise level is low, comparing to Compressor and Ultrasonic nebulizers.
  • The temperature of the medication will not rise more than 10°C (18°F) above ambient during normal use.
  • Higher flow rate and smaller residual volume, comparing to Compressor nebulizers.
  • Specifications:
  • Dimensions: 67 mm H x 48 mm W x 25 mm D
  • Nebulizer weight: 13,5 g nebulizer and plug
  • Nebulizer capacity: Maximum 6 mL
  • Performance Specifications:
  • Particle Size: Average tested 3,1 µm
  • Flow Rate: > 0,2 mL/phút
  • Residual Volume: <0.1 mL for 3 mL dose
  • Operating noise level: < 35 dB, measured at 0.3 m distance
  • Aerogen Ultra chracteristics:
  • The Aerogen Ultra is an accessory specific to the Aerogen Solo nebulizer.
  • It facilitates intermittent and continuous nebulization and optional supply of supplemental oxygen to pediatric (29 days or older) and adult patients.
  • In intermittent use for a maximum of 20 treatments; (typical usage profile of four 3 mL doses per day over 5 days) or in continuous use for a maximum of 3 hours.
  • Optimal aerosol delivery is achieved with valved mouthpiece or valvedface mask with low/no oxygen flow.
  • Can be used via mouthpiece or aerosol face mask.
  • Continuous Nebulization Tube Set characteristics:
  • The Aerogen Continuous Nebulization Tube Set is an accessory specific to the Aerogen Solo nebulizer which enables safe continuous infusion of liquid medication for aerosolization
  • Non-standard luer connectors eliminate the risk of misconnection.
  • Drop-by-drop continuous nebulisation.
  • The tubing priming volume is maximum 3.65mL.
  • Aerogen’s recommended input rate of medication into the Aerogen Solo nebulizer during continuous nebulization is up to a maximum of 12 mL per
  • For continuous use, the life of the Aerogen Solo nebuliser and the ContinuousNebulisation Tube Set have been qualified for use for a maximum of 7 days.