Aerogen Pro

ge-engstrom-nebulizer-kit-500×500-1
ge-engstrom-nebulizer-kit-500×500-1

Aerogen Pro

Placeholder Hemodynamic Monitor
Vibronic technology

Multi-patient Use
The Aerogen Pro can be sterilized and reused for patients though the hospital.

Categories: , , ,
  • Description

Description

Order

General Information

Multi-patient Use
The Aerogen Pro can be sterilized and reused for patients though the hospital.
Significantly Greater Deposition
Delivering significantly greater lung deposition compared to jet nebulizer’s delivery systems.
Multiple Configuration Options
3 ways to configure Aerogen Pro: within a ventilator circuit, with adult and pediatric face masks, and with a mouthpiece allowing for greater flexibility in use.
Simple & Quiet
Easy to setup and virtually silent operation, with no added flow required.

Specifications

  • The Aerogen® Pro System is a portable medical device for multiple patient use that is intended to aerosolize physician-prescribed medications for inhalation that are approved for use with a general purpose nebulizer.
  • This device can be used by patients on and off mechanical ventilation or other positive pressure breathing assistance.
  • Aerogen Pro controller chracteristics:
  • Function: Operate the Aeorgen Pro nebulizer.
  • The controller also includes indicators for nebulization cycle selection (15 or 30 minutes), battery charge status and fault conditions.
  • The controller can operate from the AC/DC Adapter or the internal rechargeable battery (up to 45 minutes).
  • Specifications:
  • Dimensions: 33mm H x 75mm W x 131mm D
  • Controller Cable Length: 1.8 m
  • Weight including battery and cable: 230 g
  • Power Source: input 100 to 240 VAC 50 – 60 Hz, output 9 V
  • Operating environment: temperatures from 5ºC – 40°C and humidity from 15% to 95%
  • Aerogen Pro nebulizer characteristics:
  • The Aerogen® Pro Nebulizer is intended for multiple patient use.
  • Using the Vibronic® technology for nebulization.
  • Small in size, with capacity of 10mL.
  • Small partical size for better disposition of medication at lungs.
  • Noise level is low, comparing to Compressor and Ultrasonic nebulizers.
  • The temperature of the medication will not rise more than 10°C (18°F) above ambient during normal use.
  • Higher flow rate and smaller residual volume, comparing to Compressor nebulizers.
  • Specifications:
  • Dimensions: 45 mm H x 50 mm W x 50 mm D
  • Nebulizer Weight: 25 g nebulizer and filler cap
  • Nebulizer Capacity: Maximum 10 mL
  • Performance Specifications:
  • Particle Size: Average tested 3,1 µm
  • Flow Rate: > 0,2 mL/phút
  • Residual Volume: <0.1 mL for 3 mL dose
  • Operating noise level: < 35 dB, measured at 0.3 m distance